
Tone Length
to select Short or Long.
Tone Volume
to select a keypress tone volume
Tone Type
to select a keypress tone type.
Setting Power-On/Power-Off Tone
To set Power-On/Power-Off tone:
1. Select
MENU/OK >
Settings
>
Sounds
>
Ringer Type
.
2. Select
Power-On
or
Power-Off
.
3. Press
MENU/OK, and then
select
Tones
,
Off
,
My Content
, or
-Get New
and press
MENU/OK.
4. Select a tone and press
MENU/OK.
Setting Up Voice Guide
Voice Guide activates both voice prompt and key press echo functions. With this feature on, you
can hear voice prompts when using Voice-activated dialing, Voice Memo, Screen Call, etc. and
hear a voice say the numbers that you press on the keypad.
Note:
The default setting is
Off
.
Note:
When the ringer volume is set to
Silence All
or
Vibrate All
, voice prompts cannot be
heard.
Note:
The key press echo function is available when you are in standby mode.
To turn Voice Guide on or off:
1. Select
MENU/OK >
Settings
>
Sounds
>
Voice Guide
.
2. Select
On
or
Off
.
Adjusting the Phone’s Ringer Volume
To adjust the ringer volume:
1. Select
MENU/OK >
Settings
>
Sounds
>
Volume
>
Ringer
.
2. Using your navigation key, select your desired volume level,
1 Beep
,
Ringer Off
,
Vibrate
All
, or
Silence All
and press
Done
(left softkey).
Tip
: You can make the ringer vibrate atany volume level by checking the box next to
Always
Vibrate
.
Tip
: You can adjust the ringer volume in standby mode (or the earpiece volume during a call) by
using the Side Volume key on the left side of your phone.
Adjusting the Alert Volume
This setting controls the alert volumes of Alarms, Picture Mail, Text Message, Voicemail, and
VoiceSMS. You can set the alert volume separate from the ringer volume setting.
To set the alerts:
1. Select
MENU/OK >
Settings
>
Sounds
>
Volume
>
Advanced...
.
2. Select
Alarms
,
Picture Mail
,
Text Message
,
Voicemail
, or
VoiceSMS
.
3. Using the navigation key, select
Separate Vol.
4. Press the navigation key right or left to choose a volume level, and select
Done
(left
softkey).
19