Sanyo SCP-4920, User Manual

Page: 154 / 230

Managing Ready Link Settings
Setting Speed Dialing for Ready Link Entries
To set Speed Dialing for Ready Link entries:
1.
Press to access the main menu.
2.
Select
Contacts
and press .
3.
Select
Speed Dial #s
and press .
4.
Highlight an unassigned number and press .
䡲 When you highlight an assigned number and press ,
you’ll be asked whether you want to overwrite the assigned
number. Select
Yes
or
No
, or you can also select
Unassign
to
cancel the stored speed dial.
5.
Press
Go to
(left softkey), highlight the list from which you
want to set a speed dial (
Personal List
or
Personal Groups
) and
press .
6.
Select the contact and press .
– or –
Select the group and press
, select an option, and press .
䡲
Assign
to assign the selected group as a speed dial.
䡲
Details
to display the group details. You can select the entry
from the group list.
To use Speed Dial for a Ready Link entry:
䊳
From standby mode, press the appropriate key and press and
hold .
Restarting the Ready Link Service
To restart the Ready Link service:
1.
Press to access the main menu.
2.
Select
Settings
and press .
3. Select Ready Link and press .
4. Select Restart R-Link and press .
Section 2J: Using Ready Link 143