Making a Ready Link Call (Group Call)
You can make a Ready Link call to all members in a Group entry,
which you have in your Ready Link List. You can communicate with
up to five members at a time.
To place a Ready Link Group call:
1.
Press
R-Link
(right softkey) or press
to access the Ready Link
List.
2.
Press
Go to
(left softkey), highlight
Personal Groups
, and
press .
3.
Highlight the group you want to call, and press and hold
to
place the call and take the floor. (You will see
R-Link calling...
and
Connecting...
followed by “
You have floor.
” Continue with the
Ready Link call as described above.)
䡲
To display a group member’s details, press
, highlight
your desired group member, then press
View
(left softkey)
during step 3 above. Press
to make a Ready Link call to
the member.
䡲
If one of the group members takes the floor, you will see the
member’s name and Ready Link number on the display. The
phone beeps if you press the Ready Link/Recorder button
when another contact has the floor.
4.
When the call is finished, press
.
Tip:
You can also make a Group Call after checking the group member. Press
to display group members, highlight
<Call Group>
and press and hold
during step 3 above.
Tip:
Press the navigation key right or left to move your cursor to
Redial
in the
Ready Link list.
Section 2J: Using Ready Link
131
Summary of Contents for SCP-4920
