8
Air conditioner operation
Operating your air conditioner properly helps you to obtain the best possible results.
This section explains proper air conditioner operation.
IMPORTANT:
* If you turn the air conditioner off, wait at least 3 minutes before turning it back on. This
prevents the air conditioner from blowing a fuse or tripping a circuit breaker.
* Do not try to operate your air conditioner in the cooling mode when outside temperature is
below 19
ć
. The inside evaporator coil will freeze up and the air conditioner will not
operate properly.
1.) Set the UNIT CONTROL to the desired setting. When the air conditioner is operating at
LOW COOL
,
MED COOL
, or
HIGH COOL
, the fan circulates air continuously.
HIGH COOL
- for maximum cooling
MED COOL
- for normal cooling
LOW COOL
- for sleeping comfort
FAN ONLY
when the FAN setting is selected, the fan
will run continuously to move air, but the
air will not be cooled.
Your air conditioner has one of
these controls:
UNIT CONTROL
HIGH
COOL
MED
COOL
LOW
COOL
FAN
ONLY
OFF
2.) Turn the THERMOSTAT Control to a mid-setting.
Adjust the air conditioner's performance by turning the THERMOSTAT Control clockwise
( ) for maximum cooling. For less cooling, turn the THERMOSTAT Control anti-
clockwise ( ). Experiment and find the setting that suits you best. Recommended setting
"4" to achieve the best efficiency and keep the room confortable.
Your air conditioner has one of
these controls:
COLDER
THERMOSTAT
2
