Sanyo RM-X106W, Instruction Manual

Page: 6 / 8

USING THE SLEEP TIMER
1. Slide the ALARM MODE switch to OFF , ALARM-RADIO
or ALARM-BUZZER .
2. Press the SLEEP button.”0:59” (59 minutes)appears.
The radio turns on and will turn off automatically after 59
minutes.
- To select the desired time, while holding the SLEEP button
down, press the HOUR (once) or MINUTE button repeatedly to
select the sleep time (up to 1 hour and 59 minutes). Release
the
SLEEP button.
Notes:
To release the sleep timer while in operation, press the
SNOOZE button.
If the SLEEP button is pressed while in operation, it returns to
“0:59” as above.
5
SNOOZE MODE
During the wake-up timer is operating, press the SNOOZE
button. The radio or buzzer will stop for approximately 9 minutes
but will start again and this will be repeated.
Notes:
If the
SNOOZE button is not pressed, the radio or buzzer will
sound for approximately 1 hour and 59 minutes and then turn
off automatically.
To cancel the snooze mode, push the
ALARM SET button or
set the ALARM MODE switch to OFF .