
35
Network Board
OWNER’S MANUAL [HD Series]
ENGLISH
The icons [A] and [B] represent the sensors located in the projector as follows:
[A]: Surrounding temperature of the projector*.
[B]: Surrounding temperature of the lamp.
* The indicated peripheral temperature of the projector is a little higher than actual surrounding
temperature.
Check the status of projector
Items
Description
Lamp Mode
........Displays 2 lamps or 4 lamps mode
and lamp status as below icons with
Lamp1/Lamp2/Lamp3/ Lamp4 order.
Accumulated
Lamp-use Time
..Displays the accumulated lamp
use time in hour units (h).
Accumulated
Projector-use
Time
..................Displays the accumulated pro-
jector use time in hour unit (h).
Power Status
....Displays the status of the lamp.
Projector
Condition *
1
........Displays the status of the pro-
jector's power.
Check the status of projector
In the “Power & Status” page, you can control the projector power, and also you can
check the status of the projector as follows. To change the page, click on the page
number.
z
x
Items
Description
Input Status
......Displays the selected input
mode.
Selection
............Displays the source mode of
selected input mode.
Signal Status
....Displays the signal status of the
selected input mode.
Internal
temperature*
2
....Displays the temperature at
internal thermal sensors in
centigrade/ fahrenheit degrees.
*1
When occurring the internal power failure, The word “Power Failure” and its error information
code such as “FFFEFFFF” are displayed. Unplug the projector from AC outlet and ask servicing
to a qualified service personnel with this information code.
*2 The icons [A] and [B] on the page represent the thermal sensors located in the projector. If the tem-
perature at one of those sensors exceeds specified temperature, the appearance of its icon
changes to the following alert icon to let users know the abnormal temperature. Please check sur-
rounding temperature of the projector, the clogged air filters and the area surrounding the ventila-
tion fans.
White
Normal
Gray
Off
Red
Lamp replacement required
Gray with X
Abnormality of the lamp
Summary of Contents for POA-MD13NET2
