-11-
This projector provides security functions such as "Key lock", "PIN code lock" and "Logo PIN code lock". When the pro-
jector has set these security function on, you are required to enter correct PIN code to use the projector. If you do not
know the correct PIN code to the projector, the projector can no longer be operated or started. In this case, you must
reset those function first according to the resetting procedure described below and then check up on the projector.
Security Function Notice
Resetting procedure
1.
Disconnect the AC power cord from the AC outlet.
2.
As pressing the
SeLeCt
button, connect the AC power cord into an AC outlet again.
3.
Keep pressing the
SeLeCt
button and then press the
ON/StANd-BY
button.
4.
Release the
ON/StANd-BY
button first and then release the
SeLeCt
button.
- The PIN code lock and Logo PIN code lock will be reset as the initial PIN code at the factory and
the key lock function is disabled.
Please refer to the owner's manual for further information of the security functions.
Function
description
Key lock
Locks operation of the top control or the remote con-
trol.
If the Key lock is enabled with top control lock, the
projector can no longer be started.
Initial setting: Key lock function is disabled
PIN code lock
Prevents the projector from being operated by an un-
authorized person.
Initial code: “1234”
Logo PIN code lock
Prevents an unauthorized person for changing the
start-up logo on the screen.
Initial code: “4321”
Summary of Contents for PLC-WK2500
Page 67: ... 67 IC Block Diagrams PW190 Scaler IC301 MR4010 Power OSC IC631 ...
Page 69: ... 69 IC Block Diagrams TB6608FNG IRIS Control IC601 TLV320AIC3105 Audio Control IC5002 ...
Page 74: ... 74 Parts Location Diagrams KK2 WK250000 S03 L05 Relay out M03 Relay lens Out assembly ...
Page 96: ... KK2AC November 2010 DC 50 Printed in Japan SANYO Electric Co Ltd ...
