Sanyo LCD-22XR9DZ, Service Manual

Page: 42 / 43

Wall
Clasper
Positioner
Take out these parts from the box.
Wall Mounting
Component
(including bracket
and connector)
Expansion Bolt
Wood Screw
1 1
M4 Screw
Fig. 1
2 2
Fig. 2a
Screw 4pcs expansion bolts to fix
the wall mounting bracket on the
wall. If your wall is a wooden structure, please
fix the wall mounting bracket on the wall
with 8 pcs wood screws.
3 3
Fig. 3
Use the 4pcs M4 screws to fix the wall
mounting connector to the rear of the
display unit.
Wall Mounting Bracket
Wall Mounting Connector
4 4
Fig. 4
Fully insert the two insertions on the wall mounting connector into the
locating grooves on the wall mounting bracket from top to bottom end.
5 5
Fig. 5
Use screwdriver to revolve the Clasper to the Positioner
following the direction of the arrow.
Safety Precautions:
1. Be sure to ask an authorized service personnel to carry out setup.
2. Thoroughly read this instruction before setup and follow the steps below precisely.
3.The wall to be mounted should be made from solid materials. Only use accessories supplied by the manufacturer.
4.Very carefully handle the unit during setup. We are not liable for any damage or injury caused by mishandling or improper installation.
5.Be sure to place the unit on a stable and soft platform which is strong enough to support the unit.
6.Do not uplift the speaker when moving the display. The appearance of the unit may different from the actual ones.
7.Design and specifications are subject to change without notice.
8. Retain these instructions for future reference.
WALL MOUNTING INSTRUCTIONS
Note: All the wall mounting parts are optional and may be unavailable in your model.
Below we will show you how to mount the Display on the wall using our company’s wall mounting components.
Wall
Wall Mounting Bracket
Fig. 2b