Sanyo LCD-22XR9DZ Service Manual Download Page 41

Page: 41 / 43

Detaching the Stand

2.Press the two tabs together and push inside properly, and pull out the stand at the same time to

detach the stand.

NOTE:
1.Appearance of this product in illustrations may differ from your actual product, and is for

comparative purposes only.

2.Design of this accessory or display products are subject to change without notice.

Detaching the stand column

1.Place carefully the display on its front side with a soft cushion below, shake the stand forward or

backward to adjust angle between the stand and the display, let the angle

≤

If wall mounting, please detach the stand column.
Place carefully the display on its front side with a soft cushion below, loosen and remove 4 pcs screws,
detach the stand column.

Pull out the stand

Press together and push inside

Stand Column

4 pcs screws

Tabs

Summary of Contents for LCD-22XR9DZ












































Search results

Summary of Contents for LCD-22XR9DZ

Reviews:

Related manuals for LCD-22XR9DZ

Brands by name

Popular brands

Sanyo LCD-22XR9DZ, Service Manual

Search results

Summary of Contents for LCD-22XR9DZ

Reviews:

Related manuals for LCD-22XR9DZ

Brands by name

Popular brands