Sanyo LCD-22XR9DZ, Service Manual

Page: 13 / 43

5) Select menu “
Auto
”, then select items “
All chip
”, “
program
” and other switches as
Fig. 5
Fig. 5
Burning Config
6) Press key “
Run
” as
Fig. 4
to begin burning software, there are two steps for the process:
Erase
and
Program
normal burning processes are as follows:
the first course “
Erasing…
，
Flash Status: 03
” will be lasting for a moment, otherwise skipping
over means unsuccessful erasing; please confirm process
（
2
）
and then burn software again;
the following course “
Programming…
，
Flash Status:00
” will be done until a prompt “
Pass
” is
displayed.
7) A prompt “
Pass
” will be displayed beside the key “
Run
” for successful burning as
Fig. 6
Fig. 6
A prompt “
Pass
” beside the key “
Run
” for successful burning
8) Need not exit from
ISP
burning interface and only repeat the process
3
）
and
5
）
to go on burning
software for other sets.
Note 3:
On-line burning and upgrading method from
USB
port
1
）
Be sure to format a U disk as
FAT32
;
2
）
Copy program file to the U disk with the name “
Merge.bin
”;