EN
55
C
Network update
You can update the software of this unit via the Internet if it is connected to the Internet.
1.
Follow steps 2 to 5 in “Disc / USB memory stick update” on page 54.
2.
Use
[
]
to select “Network”, then press
[OK]
.
•
The unit will connect to the server, then check for the latest software version.
3.
Software version confirmation screen will appear. Press
[OK]
.
•
Downloading of the latest software will start. (Download may take some time.)
After completing the download, update will start.
4.
After updating finishes, this unit will restart automatically.
Caution
C
•
Please
Do Not Unplug
the AC power cord, ethernet cable, wireless modem / router or press
[
y
(POWER)]
to
turn the unit to standby mode while using “Network update”.
Note
D
•
In order to update the software via the Internet, you must connect the unit to the Internet and set up
necessary settings.
•
For the network connection, refer to “Connection to the network” on page 15.
•
For the network setup, refer to “Network connection” on page 42.
•
Software update will not change any of the current settings.