9
1.
2.
3.
4.
OPERATION INSTRUCTIONS
BEEPS DURING OVEN SETTINGS
ONE BEEP: Oven accepts the entry.
TWO BEEPS: Oven does not accept the
entry, check and try again.
SETTING THE CLOCK
1. Touch CLOCK pad.
2. Use the number pads to enter the
correct time. You must touch at least
three numbers to set the clock (one for
hour and two for minutes).
3. Touch CLOCK pad again.
NOTE:
·This is a 12 hour clock. When the oven is
first plugged in or when power resumes after
a power interruption, the display will show
ENTER CLOCK TIME. If you prefer to not
have the clock displayed, touch RESET.
·You can check the clock time while cooking
is in progress by touching the CLOCK pad.
SETTING THE KITCHEN TIMER
1. Touch TIMER.
2. Enter the amount of time by touching
the number pads. Digit time is in
minutes and seconds and set left to
right. Set one digit (a 5 for 5 seconds)
or up to four digits (2405 for 24 minutes,
5 seconds).
3. Touch START/STOP.
NOTE:
·Time countdown can be seen in display for
3 seconds before clock or cooking time is
returned to display.
SETTING A COOKING PROGRAM
A. One-stage Cooking
Use the number pads to set a cooking
time. You can set a cooking time from
one second to 99 minutes and 99
seconds.
If you want to set a power level other
than 100% power, touch POWER, then:
Use the number pads to enter the power
level. You can set the power level from
1 to 9.
Touch START/STOP to start cooking.
Use single digits to set a cooking power
level:
Number pad
Cooking power
9 90%
8 80%
7 70%
6 60%
5 50%
4 40%
3 30%
2 20%
1 10%
B. Two-stage cooking
Some recipes require different stages of
cooking at different temperatures.
1.
2.
SET STAGE 1:
Follow steps 1 and 2 in “One-stage Cooking”.
DO NOT TOUCH START/STOP
SET STAGE 2:
Touch COOK and then enter proper cooking
time and (lower) power level. (Most 2-stage
recipes use lower power for second stage.)
Summary of Contents for EMS-8500S
Page 1: ......
