Sanyo ECO G SPW-GU055XH, Technical Data & Service Manual, Page: 51 / 242

3-5
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
2. Wireless Remote Controller
Optional Controller (Remote Controller)
Wireless Remote Controller / RCS-SH80AG.WL (for X type) / RCS-TH80AG.WL (for S Type) / RCS-
TRP80ANG.WL (for T, LD Type) / RCS-BH80AG.WL (for AD, U, D, F, FM Type)
How to Use the Wireless Remote Controller
The illustration above pictures the wireless remote control unit after the cover
has been lowered and removed.
I: FLAP bu tton
Q: Slide switch
L: SET button
P: ACL button
(ALL CLEAR)
A: ON/OFF operation button
B: Transmitter
D: Temperature setting buttons
H: A/C SENSOR button
N: VENTILATION button
J: TIMER SET button
O: Remote control sensor
F: FILTER button
K: Time setting buttons
G: ADDRESS bu tton
E: FAN SPEED selector button
M: CL button
C: MODE button
NOTE
A: ON/OFF operation button This button is for turning the air conditioner on and off.
B: Transmitter When you press the buttons on the wireless remote control unit, the mark appears in the
display to transmit the setting changes to the receiver in the air conditioner.
C: MODE button Use this button to select one of the following five operating modes.
(AUTO)
: Used to automatically set cooling or heating operation. Only for single heat pump
type
(Temperature range: 17 to 27°C)
(HEAT) : Used for normal heating operation. Only for heat pump type
(Temperature range: 16 to 26°C)
(DRY) : Used for dehumidifying without changing the room temperature.
(Temperature range: 18 to 30°C)
(COOL) : Used for normal cooling operation.
(Temperature range: 18 to 30°C)
(FAN) : Used to run the fan only, without heating or cooling operation.
D: Temperature setting buttons :
: Press this button to increase the temperature setting.
Press this button to decrease the temperature setting.
E: FAN SPEED selector button
(AUTO) : The air conditioner automatically decides the fan speeds.
(HI) : High fan speed
(MED)
: Medium fan speed
(LO) : Low fan speed
Continued