Sanyo ECO G SPW-GU055XH, Technical Data & Service Manual, Page: 122 / 242

3-76
Control of W-2WAY ECO-i SYSTEM
1
2
3
4
5
6
7
8
5. Schedule Timer
How to Set Holidays in a Scheduled Week of Operation
Operations programmed for a specific day during the week can be temporarily disabled by setting that day as a holiday.
When the set holiday passes, the holiday setting is canceled and operation is resumed as programmed the following week.
Holidays can be selected for the week starting from today's day. If today is selected as a holiday, the holiday setting is can-
celed from the next programmed operation. (Depending on the program, if the program is currently running, the program may
not stop.)
Today is Thursday and Friday
is set as a holiday. When Friday comes, the
program set for that day does
not run. When Saturday comes,
Friday’s holiday setting is
canceled.
Example Setting
STEP 1 STEP 1 Press the GROUP button to select a group to go on
holiday.
NOTE
Depending on installation conditions, group selection is disabled
or set so that all groups are automatically selected for the holiday
feature. If so, proceed to the next step.
STEP 2 Press the HOLIDAY button.
“HL” starts blinking in the present time display area and today's
day of the week starts blinking.
STEP3 Select a day as the holiday using the DAY button, and press
the SET button.
A “ ” appears over the selected holiday.
To select other holidays, select a day using the DAY button and
set it with the SET button.
If you made a mistake or want to cancel a holiday, press the
CLEAR button.