Getting Started 21
Taking your First Photo
English
Using the AEB (Auto Exposure Bracketing) Function
When using the AEB (Auto Exposure Bracketing) function, the camera auto-
matically takes 3 consecutive photos with different exposures by pressing the
Shutter button once. For example, when the current EV compensation value is
+0.3 EV and the AEB bracket interval value is set to ±0.3, the camera takes shots
of the same scene with 3 varying levels of exposure: 0 EV, +0.3 EV, and -0.3 EV.
This function is only available in Auto, P-Mode, Av and Tv modes. To set the AEB
mode:
1. Press the MENU button to display menu
options.
2. Press the Left/Right navigation buttons to
select AEB setting and press the OK button.
3. Press the Up/Down navigation buttons to
select from the available options:
• AEB: Select to enable (ON) or disable (OFF)
the AEB function.
• BRACKET: Select to set the bracket interval
value ranging from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.
• EXIT: Select to apply new settings to the camera and return to the setup
menu.
Note:
1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.
2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.
AEB
AEB
BRACKET
EXIT
ON
0.3EV
