Remote Setup
67
To set the live video display conditions.
b
Common settings (General)
These settings apply to all channels.
1
OSD
Sets whether to display or not date and time as well as
channel number on the screen.
• ON:
Display
• OFF:
Do not display
2
Sequence
Setting for automatically switching the displayed video.
Displays the video of the connected cameras on a
single-screen or quad-screen display sequentially, in the
order of channel numbers.
• ON:
Automatic sequencing enabled
• OFF:
Automatic sequencing disabled
3
Seq-Dwell Time
Sets the interval (1 - 60 SECONDS) for automatically
switching the screens.
4
Event Beep
Setting for sounding an alarm in the event of an alarm.
• ON:
Alarm sound enabled
• OFF:
Alarm sound disabled
5
OSD Contrast
Adjusts the character contrast on the screen.
b
Channel-specific settings
These settings apply to the specified channel only.
1
Channel designation (CH1 - CH16)
☞
In DSR-2108, CH1 - CH8.
2
Display
Sets whether to display or not video from the channel on
the monitor.
• ON:
Display
• OFF:
Do not display
3
Video image adjustment
• Brightness:
Adjusts the brightness.
• Contrast:
Adjusts the contrast.
• Hue:
Adjusts the hue.
• Saturation:
Adjusts the saturation.
B
Setting the Display
1
3
5
24
1
2
3
L8HBT_WA(DSR-2116_2108)(GB).book 67 ページ ２００９年５月２７日 水曜日 午後４時５０分
