7
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
DTV will select the correct Antenna mode for the type
of Analog RF signal connected automatically.
Use “Analog Antenna Signal” in the Setup menu to
change the Antenna Mode.
If you move the DTV to a new location, press the
RESET
key twice after connecting the signal and
turning on the DTV.
NOTES: If you do not have a VCR, connect signal directly
to the 75 ohm terminal (UHF/ VHF/ CATV).
Don’t be fooled by the phrase “Available in
High-Definition.”
The only resolution available
with any of these connections, regardless of the
original content, is standard analog (SDT V ).
RF
Antenna
DTV Back
VCR Back
2
ANALOG RF ANTENNA CONNECTION
•
Connect a Cable signal (with or without a cable box) or RF antenna to the
Analog RF input.
The analog tuner in this DTV receives Analog Antenna signals, Analog Cable
signals, or the RF output from a VCR or cable box.
CATV FRANCHISE NOTE: Cable companies, like public
utilities, are franchised by local government authorities. To
receive cable programs, even with equipment which is
capable of receiving cable channels, the consumer must
subscribe to the cable company’s service.
Analog Cable
Analog Satellite Receiver
DTV Back
VCR Back
DTV Back
VCR Back
OR
OR
(Continued on page 8.)
