12
Need help?
Visit our Web site at
www.sanyoctv.com
or Call
1-800-877-5032
DIGITAL AV CONNECTIONS
Press the
INPUT
key after connecting cables to access the
AV Inputs. There is NO need to tune to a blank channel.
With a DVI connection, make sure you connect Audio out to
the DTV’s VIDEO3 Audio in.
Because the VIDEO3 audio jacks are used to receive the
audio from the DVI device, these video jacks cannot be used
when a DVI device is connected.
1
Switch off DT V and external equipment
before connecting cable.
(Cable is not
supplied.)
2
Connect the STB’s DVI Output to a “DVI to
HDMI Cable;” then connect the cable to
the DTV’s HDMI input.
NOTE: Check with your local electronics
store for a DVI to HDMI Cable that
matches your equipment and the
DTV.
3
Connect the STB’s Audio L / R to the DTV’s
VIDEO3 Audio L / R.
4
The DTV must be turned on first, press
POWER
. Then turn on your external
equipment.
5
Press
INPUT
to select
HDMI to view a
digital program.
BACK VIEW
OF DTV
2
3
SET-TOP BOX
(Can be a Digital
Satellite Receiver,
DVD Player
, or
similar digital device.)
What you will need for
connections:
DVI to HDMI Cable – 1
Audio Cable – 1
REMOTE CONTROL
5
4
IMPORTANT NOTE FOR MONITOR USE:
If you did not connect an antenna, you
must
run All Channel Search twice before you can
select the AV inputs.
CONNECTING STB WITH DVI OUTPUT TO HDMI INPUT
