manualshive.com logo in svg

Sanyo AHX0752, Technical Data Manual, Page: 88 / 265

Share
Download
Sanyo AHX0752 Technical Data Manual Download Page 88

3-34

Control of W-3WAY ECO-i SYSTEM

1

2

3

4

5

6

7

8

3. Timer Remote Controller

4.  Set the program pattern. 

(program step 3)

There are 4 program patterns. 

Pressing 

 / 

 repeats the following display patterns.

Pattern 1

The indoor unit starts operation at the programmed 
time.

Pattern 2

The indoor unit stops operation at the programmed 
time.

Pattern 3

The indoor unit starts operation at the programmed 
time and changes the temperature settings.

Press 

 / 

 to change the temperature setting.

Pattern 4

The indoor unit changes the temperature setting at 
the programmed time.

Press 

 / 

 to change the temperature setting.

Pattern 1

Pattern 2

Pattern 3

Pattern 4

   Weekly Program Function (Continued)

Select the program pattern and press 

. The program timer setting is confi rmed and the unit enters the confi rmation mode 

.

NOTE

  If you press 

 during the setting, it returns to the program confi rmation mode.

  If there is no operation made for 3 minutes during the setting, it returns to the normal mode.

In this case, all the settings in progress will be invalid.

TD831139̲Sec3̲p25-40.indd   34

TD831139̲Sec3̲p25-40.indd   34

2008/04/17   19:16:31

2008/04/17   19:16:31

Summary of Contents for AHX0752










































































































































































































































































Reviews:

No comments