SANY SY95C, Operation And Maintenance Manual

Page: 140 / 166

5-42
MAINTENANCE
SY95C Excavator OMM
Boom Grease Manifold
0004460
Figure 5-72
1. Remove the grease fitting caps.
2. Grease the three fittings on the grease manifold (1).
This applies grease to:
• Arm cylinder base end pin (2)
• Left side of boom base pin (3)
• Right side of boom base pin (4)
3. Install the grease fitting caps.
Boom to Arm Connecting Pin
0004464
Figure 5-73
1. Remove the grease fitting cap (1).
2. Grease the boom to arm connecting pin.
NOTE: Right side grease fitting is shown, left side is
similar.
3. Install the grease fitting cap.
Swing Gear
0004545
Figure 5-74
1. Remove the grease fitting cap (1).
2. Grease the swing gear.
3. Install the grease fitting cap.
Swing Pinion Gear
0004544
Figure 5-75
1. Remove the grease fitting cap (1).
2. Grease the swing pinion gear.
3. Install the grease fitting cap.
1
2
3
4
1
1
1