Pre-Start Checks
SY75C Excavator OMM
4-6
Operation and Maintenance Manual — 0220
SANY
PRE-START CHECKS
Always complete a walk-around visual inspection of the machine with special attention to structural damage, loose
equipment, leaks or other conditions that require immediate correction for safe operation.
Daily Maintenance Record
Check the Maintenance Log to verify that all required maintenance checks have been performed before operating
the machine. If the checks and actions have not been performed, notify your supervisor.
Clean
1. Make sure these items are cleaned:
•
Windows (a)
•
Mirrors (b)
•
Grab handles (c)
•
Steps (d)
2. Remove all trash from inside the cab to avoid
interference with operation of the machine.
CAUTION!
Perform this inspection and have needed issues resolved before operation. Failure to observe
and follow this caution could result in minor or moderate injury.
CAUTION!
Never allow other personnel to ride with you
inside the operator cab. Never bring objects into
the operator cab that could restrict your
movement or vision in any manner. Failure to
observe and follow this caution could result in
minor or moderate injury.
Fig. 4-1
b
a
c
d
Summary of Contents for SY75
Page 2: ......