SY50U Excavator OMM
Machine Controls
SANY
Operation and Maintenance Manual — 0120
3-43
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
Time Adjustment
1. Press the TIME button (1) to display the current time
on the LCD (2). The display will return to radio
frequency after 5 seconds.
2. To set the hours, press and hold the time button down
while the time is being displayed until the hour
numbers flash and a beep is heard. The hours and
minutes change by one increment with each press of
the tuning buttons (3 or 4).
3. Press the tuning buttons to set the hours.
4. To set the minutes, press the time button again and the
minute numbers flash.
5. Press the tuning buttons to set the minutes.
6. Press and release the time button after the time is set.
Fig. 3-63
0002997
1
2
3
4