Machine Controls
SY50U Excavator OMM
3-42
Operation and Maintenance Manual — 0120
SANY
Searching Radio Stations
Press the power switch (5) to turn the radio on. The radio
frequency is displayed on the LCD (2).
Manual Tuning
Press and hold tuning buttons (3 or 4). Release the button
and then use the tuning buttons to manually tune the radio
until the desired radio frequency appears on the LCD.
When the frequency reaches its maximum or minimum
limit, it will start over at the opposite end of the range.
Automatic Tuning
Press and release tuning buttons (3 or 4). The radio will automatically scan and stop at the next available station.
Sound Mode Adjustment
The audio selector button (SEL) (1) adjusts the sound
quality. The sound mode adjustment option is displayed on
the LCD (2). Each time the button is pressed, the display
will cycle adjustment options as follows:
•
Press and hold the button for the bass (BAS) level
adjustment.
•
Pressing the button again will access the treble
(TRE) level adjustment.
•
Pressing the button again will access the balance
(BAL) (between the in-cab speakers) adjustment.
When the desired audio option is selected, use the volume buttons (3 or 4) to adjust the selected audio level.
If a button is not pressed (no adjustment made) after 5 seconds, the LCD will default to show the current radio
frequency.
Fig. 3-61
0002997
2
3
4
5
1
Fig. 3-62
0002997
2
3
4
1
