SY50U Excavator OMM
Machine Controls
SANY
Operation and Maintenance Manual — 0120
3-41
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
Radio Operation
Presetting Radio Stations
1. Press the power switch (3) to turn the radio on. The
radio frequency is displayed on the liquid crystal
display (LCD) (2).
2. Press either tuning button (4 or 5) to locate the desired
frequency. There are two tuning methods, manual and
automatic.
3. When a desired radio frequency is shown on the LCD,
press one of the preset station buttons (1) for at least 1.5
seconds. The sound will disappear but will return when
the presetting operation (storing the frequency to the
memory) is completed.
The preset button number and the frequency will be displayed, indicating the completion of the presetting
operation. After presetting the stations, press one of the preset buttons for at least 1.5 seconds to tune in the
preset station.
NOTE:
The AS/PS button can be used to preset the stations automatically. Press and hold the button to
activate the auto programming feature. In auto programming, the six radio stations with the strongest
signals are stored in the six preset buttons (1-6).
WARNING!
Turn the radio volume down to a level that allows you to hear traffic signals such as a horns,
sirens, and bystanders.
Failure to follow this warning could result in death or serious injury.
NOTICE!
•
The radio could be easily damaged if penetrated by water. When washing the machine, take
care not to spray water on the radio. Wipe the radio using a dry cloth.
Fig. 3-60
0002997
1
2
5
4
3
