SY50U Excavator OMM
Machine Controls
SANY
Operation and Maintenance Manual — 0120
3-9
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
• Maintain Table – Displays when the machine is due for maintenance. If maintenance is not needed, the
Maintain Table screen will not open. The Maintain Table screen is also used to reset the service timer. See
“Maintenance Information Screen” on page 3-5.
NOTE:
Access to some screens requires a password.
•
Press the button below the left/right arrow icon (1) to scroll to and highlight the selected icon.
• Press the button below the gear icon (2) to display the System Setup screen, which is password protected for
use by SANY only.
NOTE:
The gear icon selection is password protected for most of the Main Menu selections.
• Press the button below the check-mark icon (3) to access the selected icon screen if an active function of the
machine.
• Press the button below the return icon (4) to return to the previous screen.
Operation Information Screen
Fig. 3-8
0003084
1
2
The Operation Information screen displays real-time
engine operating values, fuel level, and load-sense pressure
with the engine running:
•
Press the button below the up/down arrow icon (1)
to scroll to the next pages.
•
Press the button below the return icon (2) to return
to the Main Menu screen.