SY50U Excavator OMM
Machine Operation
SANY
Operation and Maintenance Manual — 0120
4-33
TABLE OF
CONTENTS
INTRODUCTION
SAFETY
MACHINE
CONTROLS
MACHINE
OPERA
TION
MAINTENANCE
SPECIFICA
TIONS
OPTIONAL
EQUIPMENT
TRAVEL
General Travel Instructions
•
The machine’s travel direction is controlled by the
travel control levers/pedals and dictated by the location
of the travel motors relative to the cab.
•
When the travel motors (1) are positioned behind the
cab, press the top of the travel control pedals or push
the travel control levers forward to move the machine
forward.
•
Select a flat travel surface and travel in a straight line.
If possible, turn the machine slowly and gradually.
•
Never let the machine make contact with power lines
or bridges (2).
WARNING!
•
Check the surroundings and sound the horn before moving the machine.
•
Personnel are not allowed to approach the machine without operator approval.
•
If the travel motors are in the front of the machine, the travel control pedals will operate in
reverse. Check the position of the travel direction arrows on the track frame before
traveling.
•
The rear of the machine is a blind area. Use the mirror and be extremely careful when
backing up the machine. Use a signalman as needed.
Failure to follow these warnings could result in death or serious injury.
Fig. 4-44
0002878
1
Fig. 4-45
0002880
2
