SANY SY500H, Operation And Maintenance Manual

Page: 64 / 196

3-34
MACHINE CONTROLS
SY500H Excavator OMM
2. Press function button F1 (4) to move between the
two options.
3. Press function button F3 (3), then turn the key switch
to OFF and back to ON to confirm the selection.
4. Press function button F5 (2) to return to the System
Setting screen without making any changes.
Screen Backlight Setting
0004957,00004868
Figure 3-59
NOTE: Use this screen to adjust the screen brightness for
better readability of the monitor.
1. Proceed to the Screen Backlight icon (1) on the
System Setting screen, then press function button F3
(3).
2. Press function button F1 (5) to increase the screen
brightness, or function button F2 (4) to decrease the
screen brightness.
NOTES: The number will change and the progress box
will fill and empty to graphically indicate the
screen brightness percentage (10% to 100%) as
set by the function buttons F1 (5) and F2 (4).
3. Press function button F3 (3), then turn the key switch
to OFF and back to ON to confirm the selection.
4. Press function button F5 (2) to return to the System
Setting screen without making any changes.
Time Format Setting Screen
0004957,0004708
Figure 3-60
F5 F4 F3 F2 F1
5
1
4
3
2
F5 F4 F3 F2 F1
1
2
3
4