SANY SY500H, Operation And Maintenance Manual

Page: 59 / 196

MACHINE CONTROLS
3-29 SY500H Excavator OMM
Password Screen
0004957, 0004747
Figure 3-48
NOTE: This screen appears whenever the Work
Parameters icon is selected on the Main Menu
screen.
1. Enter the five-digit password (1). Each digit is
indicated by an asterisk (*) standing for a value from
0-9. A number initially appears where the cursor is
located, and then changes to an asterisk.
2. Press function button F1 (5) to increase the digit.
3. Press function button F2 (4) to move between digits.
4. Press function button F3 (3) after entering the
five-digit password.
5. Press function button F5 (2) to return to the Main
Menu screen without entering a password.
Work Parameters Screens
These screens are for use by SANY technicians only and
require a password.
Maintenance Information Screen
0004957, 0005066
Figure 3-49
NOTE: Use this screen to view procedures required for
your machine when the Periodic Maintenance
umbrella icon illuminates on the Home screen.
1. Press function button F1 (4) once on the Main Menu
screen to navigate to the Maintenance Info icon (1).
NOTE: No password is required for this screen.
F5 F4 F3 F2 F1
2
1
3
5 4
F5 F4 F3 F2 F1
3
1
2
4