SANY SY500H, Operation And Maintenance Manual

Page: 42 / 196

3-12
MACHINE CONTROLS
SY500H Excavator OMM
Liquid Crystal Display (LCD)
The liquid crystal display screen (6) displays the band
(either AM or FM), currently tuned radio station
frequency, present station number, and current time.
Power Button
Press and release the power button (7) to turn the radio
on. The currently selected radio station frequency will
appear on the display screen when the radio is turned on.
Press and release the power button to mute the radio.
Press and hold the power button to turn the radio off.
WARNING
For safety, maintain volume at a level that allows
the operator to hear alert signals, such as horns
or sirens. Failure to follow this warning could
result in death or serious injury.
Volume Control Buttons
Press the volume (VOL) + (increase) or – (decrease)
button (8) for volume.
Tuning Buttons
Press the right ( ► ) or left ( ◄ ) arrow tuning buttons (9) to
search for the next available radio station frequency
within range.
Preset Station Buttons
Press and hold any of the six preset station buttons (10)
to assign the current radio station to that button. When
stations have been assigned to the buttons, press and
release a preset station button to select.
Antenna
0004674
Figure 3-11
If the radio signal is weak or noisy, adjust the antenna (1)
by loosening the wing nut (2) and moving the antenna to
the appropriate position.
Right Control Console
Switches
0004676
Figure 3-12
The right control console includes the following controls:
• Right joystick (1)
• Key switch (2)
• Throttle control dial (3)
• Work light switch (4)
• Windshield wiper switch (5)
• Windshield washer switch (6)
• Headlights (7)
• Travel alarm silence switch (8)
• Regeneration disable switch (9)
• Stationary regeneration switch (10)
2
1
1
8
10
9
3
4
5
6
7
2