SY26U Excavator OMM
Machine Operation
SANY
Operation and Maintenance Manual — 1119
4-5
T
ABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
PRESTART CHECKS AND ADJUSTMENTS
Complete the following checks and adjustments before starting the engine each day:
•
Check the maintenance log to verify that all required maintenance checks have been performed before
operating the machine.
•
Check the machine for loose hardware, fluid leaks, and any other signs of damage. Make repairs as
necessary.
•
Inspect the engine compartment for combustible debris that may come in contact with hot engine
components. Clear all debris from the engine and engine compartment.
•
Check the undercarriage (tracks, drive sprockets, rollers, and guards) for damage, wear, loose fasteners,
and roller oil leaks. Make repairs as necessary.
•
Check the bucket or optional equipment for damage. Clean and check the mirrors and side mirrors for
damage. Repair if necessary. Adjust the mirrors so the area behind the machine is visible from the operator
seat.
•
Check the seat belt and buckle for damage or wear. Replace them if necessary.
•
Check the monitor in the canopy. Repair or replace any malfunctioning parts and components.
