SY26U Excavator OMM
Machine Controls
SANY
Operation and Maintenance Manual — 1119
3-9
T
ABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Main Menu Screen
The Main Menu screen displays the main signals to and
from the system controller, including real-time running
information, machine configuration, detailed failure
information, available languages, and maintenance
information:
• Operation Information – Displays real-time engine
operating values, fuel level, and load-sense pressure
with the engine running.
•
Machine Configuration – Displays basic information
of the excavator
.
• Failure Information – Displays detailed failure codes
recorded by the machine.
• Global Positioning System (GPS) Information – Not
used at this time in North America.
• Language Selection – Select the language that
displays information on all screens.
• Maintain Table – Displays when machine is due for
service. Also used to reset the service timer.
NOTE:
Access to some screens requires a password.
•
Press the button below the left/right arrow icon (1)
to scroll to and illuminate the selected icon.
• Press the button below the gear icon (2) to display the System Setup screen, which is password protected for
use by SANY only.
NOTE:
The gear icon selection is password protected for most of the Main Menu screen selections.
• Press the button below the check mark icon (3) to access the selected icon screen for the active machine
display.
• Press the button below the return icon (4) to return to the previous screen.
Fig. 3-8
0003810
1
2
3
4
