SY265C LC/SY265C LR Excavator OMM
SANY
Operation and Maintenance Manual — 0420
5-81
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
SPEC
IFI
CA
TIO
N
S
OP
T
IO
N
A
L
EQUI
PMENT
Track Frame
Check the Track Assembly
NOTE:
Use a pry bar to shift and/or lift the track shoes as needed to perform this procedure.
1. Prepare the machine for service. See “Maintenance Safety” on page 2-8.
2. Remove as much accumulated dirt as possible from the track assemblies.
3. Check track shoes (5) for damage, wear, unevenness, looseness, raised sections, binding, or any other
abnormality.
4. Replace track shoes as necessary.
5. Check the idler (2), track rollers (3), and top rollers (1) for wear and proper operation.
6. Check the track final drives (4) for wear and proper operation.
Check the Track Shoe Fasteners
1. Prepare the machine for service. See “Maintenance
2. Make sure that all fasteners are in place for each track
shoe (1) and not broken, bent, damaged, or loose.
3. Replace any broken, bent, or damaged fasteners.
4. Tighten all loose fasteners.
Fig. 5-106
0005212
4
2
1
3
5
5
Fig. 5-107
1
0005236
Summary of Contents for SY265C LC
Page 2: ...Page Intentionally Blank ...
Page 287: ...Page Intentionally Blank ...
