Machine Operation
SY215C LC/SY225C LC Excavator OMM
4-6
Operation and Maintenance Manual — 1219
SANY
CLEANING THE MACHINE
Cleaning the Machine Exterior
NOTE:
Clean the grab handles and steps of any grease or debris to allow a firm grip when entering or exiting
the cab area.
Make sure these items are cleaned before operating the
machine:
•
Windows (1)
•
Steps (2)
•
Grab handles (3)
•
Mirrors (4)
Cleaning the Cab Interior
Remove all trash from inside the cab to prevent interference with operation of the machine.
Check that the escape tool and fire extinguisher are present. See “Check the Final Drive” on page 5-52 and “Check
the Fire Extinguisher” on page 5-55.
PRESTART CHECKS AND ADJUSTMENTS
Complete the following checks and adjustments before starting the engine each day:
•
Check the maintenance log to verify that all required maintenance checks have been performed before
operating the machine.
•
Check the machine for loose hardware, fluid leaks, and any other signs of damage. Make repairs as
necessary.
•
Inspect the engine compartment for combustible debris that may come in contact with hot engine
components. Clear all debris from the engine and engine compartment.
CAUTION!
Never allow passengers to ride inside or on the machine. Never bring objects into the cab that
could restrict your movement or vision in any manner, which could result in injury.
Fig. 4-1
1
4
3
0004586
2
