Machine Controls
SY215C LC/SY225C LC Excavator OMM
3-42
Operation and Maintenance Manual — 1219
SANY
2. Then do either of the following:
•
Press F3, turn the key switch to OFF, and then back
to ON, to enable the rocker switch on the right
joystick for one-way flow equipment operation, to
confirm the hydraulic oil flow rate, and to place the
breaker icon (1) on the home screen.
•
Press F5 to return to the Tool Select screen without
making any changes.
Shear
Fig. 3-54
F5
F4
F3
F2
F1
0004563
NOTE:
Use this screen to enable the joystick switches
for shear or other two-way flow tool operation,
and to adjust the hydraulic oil flow for this
tool.
1. Press F1 or F2 to change the hydraulic oil flow rate for
rotation of this tool.
The range available is 10.5 gpm–18.4 gpm
(40 Lpm–70 Lpm).
The numeric values for liters per minute and gallons per
minute will change and the progress box will fill and empty
to graphically indicate the chosen hydraulic oil flow rate.
2. Press F4 to move to the open/close hydraulic oil flow
rate adjustment for this tool.
3. Press F1 or F2 to change the hydraulic oil flow rate for
the open/close action of this tool.
NOTE:
•
The available range is 13.2 gpm–5.6 gpm
(50 Lpm–400 Lpm).
•
The numeric values for liters per minute and gallons
per minute will change, and the progress box will
fill and empty to graphically indicate the chosen
hydraulic oil flow rate.
Fig. 3-53
1
0004597