Machine Controls
SY215C LC/SY225C LC Excavator OMM
3-40
Operation and Maintenance Manual — 1219
SANY
Machine Configuration Screen
This screen is for SANY technician use only and requires a password.
Tool Select Screen
Fig. 3-50
F5
F4
F3
F2
F1
0004566
NOTE:
Use the Tool Select screen to specify which
equipment is attached to the machine and
adjust the hydraulic oil flow for the equipment
if needed.
1. Press F1 five times at the Main Menu screen to navigate
to the Tool Select option, then press F3.
NOTE:
No password is required for this screen.
2. Press F1 and F2 to scroll up and down the displayed list.
NOTE:
The quick coupler is only available on the
SY225C LC machine.
3. Then do the following:
•
Press F3 to confirm the selection and proceed to the
next screen.
•
Press F5 to return immediately to the Main Menu
screen without specifying any tool.
