Machine Controls
SY215C LC/SY225C LC Excavator OMM
3-30
Operation and Maintenance Manual — 1219
SANY
Main Menu Screen
Fig. 3-40
F5
F4
F3
F2
F1
0004549
NOTE:
The Main Menu screen displays icons for
various options that can be accessed using the
function keys at the bottom of the screen.
Each icon will be highlighted as it is selected.
1. Press F5 at the home screen to access this screen.
•
Work Parameters (password required) –
Informational screens that show data about the
various machine systems.
NOTE:
See “Password Screen” on page 3-31.
•
Maintenance Information (no password required) –
Informational screen(s) are viewable only when
maintenance is required.
•
Error Codes (no password required) – Displays
specific codes if a fault condition occurs.
•
System Setting (no password required) – Screens
that allow for language, units of measure, time, and
date selection.
•
Machine Configuration (for factory use only).
•
Tool Selection (no password required) – Screens
that provide for adjustment of the hydraulic oil
flow to attached equipment.
2. Press F1 to navigate to the desired icon.
3. Press F3 to confirm the selection and proceed to the
next screen.
NOTE:
•
F4 is for use only by SANY factory technicians.
•
Press F5 to return to the home screen without selecting any icon.
