SY215C LC/SY225C LC Excavator OMM
Maintenance
SANY
Operation and Maintenance Manual — 1219
5-101
TABLE
O
F
CONTENTS
INTRODUCTION
SAFETY
M
A
CHINE
CO
N
T
RO
L
S
MACHINE
OPE
R
A
T
IO
N
MAINTENANCE
S
PECI
F
ICA
T
IO
NS
OPT
IONAL
EQ
U
IPM
E
N
T
Check the Windshield Washer Fluid and Windshield Wiper
1. Prepare the machine for service. See “Maintenance
2. Check the washer fluid level inside the windshield
washer tank (1), located behind the left front door.
NOTE:
Use windshield washer fluid appropriate for
very cold or winter climates as required.
3. Remove cap (2) and add windshield washer fluid as
necessary.
4. Check the operation of the windshield washer nozzle
(3) and wiper (4) to make sure there is no smearing
across the windshield during operation. Replace the
wiper blade with a new one if smearing does occur.
5. Adjust the spray nozzle (3) to make sure fluid spray is
properly directed.
6. Inspect the windshield wiper for excessive wear.
Replace as necessary.
NOTICE!
Do not operate the wiper on a dry window.
Failure to observe and follow this could result in
machine damage and improper machine
operation.
Fig. 5-157
2
1
Fig. 5-158
3
4
