SANY SY16C, Operation And Maintenance Manual, Page: 100 / 208

Machine Operation SY16C Excavator OMM
4-28
Operation and Maintenance Manual — 0420
SANY
Bucket Control
To uncurl the bucket, move the right joystick to the right.
To curl the bucket, move the right joystick to the left.
Boom Swing Control Pedal
The boom swing control pedal is mounted on the canopy
floor to the right of the travel controls. The boom swing
control pedal swings the boom to the right or left. Press the
right side of the pedal to swing the boom right, and press
the left side of the pedal to swing the boom left.
Dozer Blade Control
NOTE: The dozer blade control/track spread lever is
also used to increase or decrease track spread
(gauge). See “Track Spread (Gauge)
Adjustment” on page 4-30.
1. Place the dozer blade/track spread switch (2) to the
dozer blade position.
2. Raise the dozer blade by pulling the dozer blade/track
spread control lever (1) backward.
3. Lower the dozer blade by pushing the dozer blade/
track spread control lever forward.
Fig. 4-32
0002843
Fig. 4-33
0003793
Fig. 4-34
0005143
2
1