SY135C Excavator
Machine Controls
SANY
Operation and Maintenance Manual — 0120
3-17
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
S
P
E
CI
F
ICA
T
ION
S
OP
T
IO
N
A
L
EQUI
PMENT
Seat and Seat Belt
A multi-position, air ride adjustable seat is provided for operator comfort.
Headrest Adjustment
Fig. 3-23
0004611
1
The headrest (1) can be adjusted up or down for additional
operator comfort.
Armrest Angle Adjustment
Fig. 3-24
0004614
3
2
3
2
Adjust the armrest angle by rotating the dial (3) at the
bottom of the armrest (2). Both armrests can be moved up
and down to allow the operator greater access to the side
consoles or for operator comfort.
Backrest Angle Adjustment
Fig. 3-25
0004612
8
6
5
4
9
7
10
11
Pull up on the backrest adjustment lever (4) to adjust the
angle of the backrest to the desired position. Release the
backrest adjustment lever to lock the seat backrest in
position.
Seat Forward/Backward Position Lock
Move the position lock lever (5) to allow the seat to move
forward and backward. Move the position lever forward,
then firmly move the seat backward to lock it into position.
Seat Forward/Backward Position Adjustment
Lift and hold the forward and backward lever (6) to slide
the seat (11) to the desired position. Release the lever to
lock the seat in position.
Seat Base Forward/Backward Position Adjustment
Lift and hold the seat base adjustment lever (9) to slide the seat base (10) and control consoles forward or
backward. Release the lever to lock the seat base in position.
