Machine Operation
SY135C Excavator
4-42
Operation and Maintenance Manual — 0120
SANY
Unloading the Machine
1. Chock the trailer wheels to prevent movement of
the trailer during unloading.
2. Attach or construct ramps of suitable strength,
width, and length to unload the machine.
3. Remove all tie-downs (1) and blocks securing the
machine to the trailer.
4. Position the exterior mirrors so the operator has a
clear view to the front and rear of the machine.
WARNING!
• To prevent the machine from tipping over, select a firm and level location that is a safe
distance from any road or structure.
• Make sure the trailer is properly chocked to prevent any movement.
• Use an access ramp with enough length, strength, and width to properly support the
machine. The ramp grade should not exceed 15°.
• Drive slowly at the junction of the ramp and the trailer. The machine may shift suddenly due
to a change in the center of gravity.
• Use a signalman to observe and alert the operator of any potential hazards.
Failure to follow these warnings could result in death or serious injury.
Fig. 4-58
0000726
1
1
