SY135C Excavator
Machine Operation
SANY
Operation and Maintenance Manual — 0120
4-25
TABL
E OF
CONT
E
N
TS
INTRODUCTION
SAFE
T
Y
MACHIN
E
CONTROLS
MACHINE
OP
ERA
T
IO
N
MA
INTENANCE
S
P
E
CI
F
ICA
T
ION
S
OP
T
IO
N
A
L
EQUI
PMENT
WORK EQUIPMENT CONTROL AND OPERATION
NOTE:
The joysticks will return to the neutral position when released, and the work equipment will hold its
position.
NOTE:
There are two operating modes available for the joystick controls, the Society of Automotive
Engineers (SAE) mode and the Backhoe Loader (BHL) mode. The swing and bucket functions are
the same for the SAE and BHL modes.
SAE Control Pattern
See “SAE Mode” on page 3-31 for additional information.
Swing
Fig. 4-27
0000588
NOTE:
The swing function is the same for Society of
Automotive Engineers (SAE) and backhoe
loader (BHL) modes.
To swing the upper structure to the left, move the left
joystick to the left.
To swing the upper structure to the right, move the left
joystick to the right.
Arm
Fig. 4-28
0000589
To extend the arm, push the left joystick forward.
To retract the arm, pull the left joystick to the rear.
