MODULAR SUNWAY TG
TE OD
INSTALLATION GUIDE
48/
139
Rev. 03
– 01/06//2018
Figure 24: Fastening the rooftop to the inverter
Once the mounting procedure is completed, replace the eyebolts with the screws removed prior to fasten
the rooftop to the cabinet.
5.4.
Environmental requirements for storage and transport
Required conditions
Ambient temperature for
storage and transport
-25 °C ÷ +60 °C
Ambient humidity for storage
From 5%
– 95%, from 1 g/m
3
– 25 g/m
3
, with no condensation or ice
formation (category 3K3 in compliance with EN 50178).
Ambient humidity during
transport
Maximum 95% up to 60 g/m
3
. Slight condensation may occur when
the equipment is not running (category 2k3 in compliance with EN
50178).
Atmospheric pressure for
storage
86
– 106 kPa (categories 3k3 and 1k4 in compliance with EN 50178).
