Santerno ASAC-0, User Manual

Page: 8 / 12

8/12 ASAC-0
6 Accessories
6.1 Finger Guard Kit
Finger guards may be specified for personnel safety. Finger guards fit over the soft starter terminals to prevent accidental contact with
live terminals. Finger guards provide IP20 protection when used with cable of diameter 22 mm or greater.
6.2 Remote Operator
The Remote Operator can control and monitor the soft starter's performance. Functionality includes:
• Operational control (Start, Stop, Reset, Quick stop)
• Starter status monitoring (Ready, Starting, Running, Stopping, Tripped)
• Trip code display
6.3 Communication Modules
ASAC-0 soft starters support network communication via easy-to-install communications modules. Each soft starter can support one
communications module at a time.
Available protocols:
Ethernet (Profinet, Modbus TCP, Ethernet/IP), Profibus, DeviceNet, Modbus RTU, and USB.
NOTE
Ethernet communication modules are not suitable for use with ASAC starters using 380/440 VAC control voltage.
6.4 PC Software
The software allows comprehensive management of soft starters. It provides the following functionality:
Operation of soft starter networks containing up to 254 individual soft starters
•
Operational control (Start, Stop, Reset, Quick stop)
•
Starter status monitoring (Ready, Starting, Running, Stopping, Tripped)
To use RemoteDrive with the ASAC-0, the soft starter must be fitted with a USB Module, Modbus Module or a Remote Operator.