11
800.533.7533 | Santa-Fe-Products.com
Santa Fe Oasis105 Installation & Operation Instructions
Ducting To Finished Areas (Optional)
Passive Return Vent
1
2
Optional Wall
Mount Dehumidistat
(mounts on opposite wall in finished area)
3
Supply Grill
4
Supply/Discharge
Duct Work
Finished Area
Unfi
nis
hed
Are
a
3
1
2
4
ish
h
Installation of a Supply Kit Only
Return/Intake
Duct Work
6
1
Return Grill
3
Supply Grill
Supply/Discharge
Duct Work
Installation of a
Santa Fe Compact2 With a
Supply Duct Kit Only
Finished Area
1
Optional Wall Mount
Dehumidistat
(mounts on
opposite wall in finished area)
2
Passive Return Vent*
5
4
6
5
2 3
4
Unfi
nis
hed
Are
a
Installation of a Supply and Return Duct Kit
Recommended Installations
• Place the Santa Fe dehumidifier in the unfinished area
of the basement, near a drain access (condensate will
drain via gravity or with an optional pump kit).
• Using the supply duct collar, supply the dry air from
the dehumidifier into a large, open area in the
finished section of the basement.
• Place a return grill / passive vent on the other side of
the wall that separates the finished and unfinished
areas. This will allow for a circular air flow
throughout the basement.
• The passive grill will prevent the unfinished room
from being placed under a negative pressure and
also allow the dehumidifier to focus on keeping the
unfinished area dry as well.
• The onboard dehumidistat control can be used
on the unit for this application or a 120 volt
dehumidistat can be placed in the finished basement
as well.
• Be sure to keep all doors open to any other rooms in
the basement to help with proper air circulation
(bedrooms, bathrooms, etc.)
• Place the Santa Fe dehumidifier in the unfinished area
of the basement, near a drain access (condensate will
drain via gravity or with an optional pump kit).
• Using the supply and return duct kit, supply the dry
air from the dehumidifier into a large, open area of the
finished basement. Use the return duct kit to draw air
back through the dehumidifier.
• Be sure the return and supply are at least 10 feet away
from each other for proper air flow throughout the
basement. Add a passive grill between the finished
and unfinished areas (
*
or have a 2” gap under the door
separating the two rooms). This will help keep the
unfinished area dry as well.
• Use the 120 volt, wall mounted dehumidistat for this
installation for proper run time on the dehumidifier.
• Be sure to keep all doors open to any other rooms in
the basement to help with proper air circulation
(bedrooms, bathrooms, etc.)
