SanRex CALPOTE UG Series, Instruction Manual, Page: 50 / 97

50
Code Function name Setting range Increment Unit
Default
value
Changeable
during
operation
F700 Self-diagnosis
0: Temporary STOP
1: Enable
– – 1 ✗
F701
RUN/STOP key
lock
0: Unlock
1: Lock
– – 0 ✗
F702 SAVE key lock
0: Unlock
1: Lock
– – 0 ✗
 F700: Self-diagnosis stop
The self-diagnostic function can be suspended for test operation or other purposes.
 F701: RUN/STOP key lock
Pressing the RUN/STOP key on the display panel can be disabled. This setting disables the
starting and stopping of the output from the display panel. (Start/stop switching via the ST
terminal on the control terminal block or via communication remains enabled.)
 F702: SAVE key lock
Pressing the SAVE key on the display panel can be disabled. This setting cannot change the
parameters. (Parameter changing via communication remains enabled.)
Unlocking method: Select [0: Unlock] on the F702 setting screen and press the SAVE key.