SanRex CALPOTE UG Series, Instruction Manual, Page: 48 / 97

48

F503: Transmission mode
Set the transmission mode of the unit. Set it to match that of the master.
F503 setting Data bit length Parity Stop bit length
8n1 8 bits None 1 bit
8o1 8 bits Odd 1 bit
8E1 8 bits Even 1 bit
8n2 8 bits None 2 bits
8o2 8 bits Odd 2 bits
8E2 8 bits Even 2 bits

F507: Transmission latency
Set the time from when the unit receives data from the master to when it starts responding.
When the unit responds too quickly, a time lag can be set to allow the master to receive
data.
Code Function name Setting range Increment Unit
Default
value
Changeable
during
operation
F601
Er.01:
Overcurrent
detection
– – 1 ✗
F602
Er.02:
Temperature rise
error
– – 1 ✗
F603
Er.03: Fuse
blowout
– – 1 ✗
F604
Er.04: Self-
diagnosis
Load short
circuit error
0: No output – – 1 ✗
F605
Er.05: Self-
diagnosis
Thyristor open
1: Output to 1A-1C – – 1 ✗
F606
Er.06: Self-
diagnosis
Thyristor short
circuit
2: Output to HA-HC – – 1 ✗
F607 Er.07: CPU error 3: Output to both – – 0 ✗
F608
Er.08: Memory
error
– – 0 ✗