Pairing
Prior to using the headset for the first time. you must pair it with a
Bluetooth-enabled mobile handset.
The following steps describes pairing introduction for a typical Bluetooth
-enabled mobile handset.
1: place the headset and mobile handset no more than 1 meter.
2: Ensure the headset is off.
3: Press and hold the answer/end key for 8 seconds until the headset LED
alternately flashes red and blue. Its now ready for pairing .
4: Activate your mobile handset’s Bluetooth function by referring to your
mobile handset user guide for details, mean while ,the handset will search
for accessible Bluetooth devices
5: Select “SM-S36” from the list.
6: Enter the pre-programmed passkey “0000” and press “ok” to pair the
headset and mobile handset. When pairing the headset is completed, the
headset LED will flash blue every 3 times followed by a long beep.
7: Press “return” to go back to your handset’s main menu. For certain
mobile handset models ,a headset icon will be show on the screen .you
should now be able to make and receive calls using your headset.
IMPORTANT: If the pairing can’t be completed within 2 minutes while
the paring mode is activated the headset LED flashed purple red within 3
beeps and the headset is turned off . please repeat steps 2 to 7 to pair the
