Sanken Samco SVC06, Instruction Manual, Page: 60 / 136

- 58 -
5-5 Special functions
5-5-2 Changed code display operation
Considering current function code data may be different from the factory presets of product or the user's initial value,
the function for displaying a changed function code and its data.
This is an effective function for inquiring the difference between current function code and product’s factory preset
or the user initial value.
Confirmation of maintenance and other function codes can be easily achieved by this function.
Operation example: displaying difference with product’s factory preset data
Operation Display Description
Select function code F1602 (changed code display function)
or
(press)
Press (Set) key or quick knob, then the set value of
function code will be displayed.
Turn the quick knob to select 1
If F1602 = 1, the current function code data will be compared
with the factory preset function code data.
Press the (Set) key to start searching the number of a
function code which has been changed and is different from
the factory preset function code data. While the function is
searching, a flashing
will be displayed on
7-segment monitor.
After searching
or
After searching, the changed function code starts flashing on
display screen.
If there is no changed function code, a flashing
will
be displayed on screen.
or
If there are more than one changed function codes, they can
be switched by adjusting the quick knob.
Or
(press)
Press the (Set) key or quick knob, then the set value of
function code will be displayed flashing.
or
Press the (Back) key or key to return to the changed
function code (flashing display state).
or
Press the (Back) key or key to return to function
code selection interface.
See the contents of function code F1602 of the function and its operation method.