Sanken Samco SVC06, Instruction Manual, Page: 103 / 136

- 101 -
-
101
-
C
h
ap
ter
8
8-2 Conflict & Interference Error
8-2 Conflict & interference error

During function code entering, a conflict & interference error will be displayed when the entered data
conflicts with the settings of other function codes. The displayed 4-digit number is the number of conflict &
interference function code.

The entered data is invalid when a conflict & interference error is displayed. Please correct it to a value
without a conflict, or change the values of the conflict & interference function code.

For function code and error display related to conflict and interference, please refer to Table 8.2.
8-2-1 List of conflict & interference error
Table 8.2 List of conflict & interference error
Setting function code
Error code Description
No. Name Setting
1001 Motor control mode
selection
All
(exclude 1
and 40)
E5001 The setting motor cannot be used in vector
control
E1007/E1316/E1317 Exceed the upper frequency limit
2 E1901 Simple energy-saving function (only in V/f
mode) cannot be used in vector control mode
3 E1002 Cannot set PG input repeatedly
E1901 Simple energy-saving (only in V/f mode), cannot
be used in vector control mode
4 E1901 Energy-saving mode cannot be used in torque
control
E2201 Pattern, disturbed operation cannot be used in
torque control
E3201 PID control action cannot be used in torque
control
5 E1002 Cannot set PG input repeatedly
E1901 Energy-saving mode cannot be used in torque
control
E2201 Pattern, disturbed operation cannot be used in
torque control
E3201 PID control action cannot be used in position
control
6 E1002 Cannot set PG input repeatedly
E1101 Position control mode is only effective when
operation command is external terminal
E1901 Energy-saving mode cannot be used in position
control
E2201 Pattern, disturbed operation cannot be used in
position control
E3201 PID control action cannot be used in torque
control
10,11 E1901 Energy-saving mode cannot be set when motor
parameter are measured automatically
E2201 Pattern, disturbed operation cannot be set during
automatic measurement
E3201 PID control action cannot be set during automatic
measurement
40 E1901 Energy-saving mode cannot be set during V•f
separation control
E2201 Pattern, disturbed operation cannot be set in V•f
separation mode
E3201 PID control action cannot be set in V•f separation
mode
All Exxxx Cannot set analog input repeatedly