background image

4) HI-JACK WARNING PERIOD

After the delay period the unit will enter the 
warning period, the unit will beep
rapidly for 30 seconds to warn you that you are 
now entering the final stage of hi-jack. Refer to 
step 7 to reset hi-jack.

1) DRIVER’S DOOR HI-JACK MODE

In drive, open then close driver’s door. If all 
doors, bonnet and boot are closed the dash led 
will flash once. The unit is now in the hi-jack 
delay period Refer to step 7 to reset hi-jack.

ZX90

The ZX90 is a new generation anti 
hi-jack system that can be fitted 
to any vehicle. Sanji have 
incorporated the most up to date 
technology to improve security and long term 
performance and reliability. The ZX90 is 
manufactured to full international ISO 9001 
and SABS quality standards. 

Read these instructions for correct system 
operation. All points marked    are optional 

*

*

led flash

once

2) FORCED HI-JACK MODE

Turn the ignition on, the unit will enter hi-jack 
(forced), the led will flash once. The unit has 
entered the hi-jack delay period. If you start the 
vehicle with the hidden button pressed the unit 
will not enter forced hi-jack. Refer to step 7 To 
reset hi-jack.

*

led flash

once

3) HI-JACK DELAY PERIOD
    

The countdown period is 1min30sec 
and can be changed if required. 
Refer to point 9 for further 
details.

If the ignition is turned off during the hi-jack 
delay period, the timer will stop and will 
continue when the ignition is turned back on 
again. Refer to step 7 to reset hi-jack.

countdown

stopped

countdown

resumes

hi-jack

countdown

1min30sec

beep rapidly

5) HI-JACK SLOWDOWN PERIOD
    

After the warning period the unit enters the
slowdown period which slows down the vehicle 
before entering final hi-jack and immobilising. 
Refer to step 7 to reset hi-jack.

6) HI-JACK FINAL PHASE

In final hi-jack the vehicle will be immobilised, 
the dash led will be on solid and the beeper will 
sound on and off at 5 second intervals.
If fitted with a siren, the unit will sound the 
siren on and off at 5 second intervals. Refer to 
step 7 to reset hi-jack.

siren

(optional)

7) RESETTING HI-JACK

Press the hidden push button at any time until 
the unit sounds 4 beeps to confirm that hi-jack 
has been reset.

hidden

override

button

4 beeps

8) SERVICE MODE

In drive mode (ignition on). Press and hold the 
hidden override button for 10 seconds until the 
unit beeps :

press for

10 seconds

2 beeps
service mode ON.

1 beep
service mode OFF.

When in service mode the dash led will flash 
rapidly as an indication that the unit is in service 
mode.

Every time the ignition is turned on to drive, the 
unit will sound 4 beeps to warn you that the 
unit is in service mode.

Reviews: